OKM GeoSeeker Water and Cavefinder Metal Detector
A New Powerful Water and Cavefinder
The OKM GeoSeeker Water and Cavefinder is most accurate and deepest detection Ground penetration locator OKM has ever offered. The GeoSeeker in Active Scan modes can output a large scan voltage of up to 390 Volts. The active scan mode is the most accurate scan method and will give the best results in the location of water and caves or caverns.
The Geoseeker can also operate in a passive scan mode without direct power input that will only measure the natural occurring voltage that is in the ground itself. This type of scan is suitable in sloping areas with an underground watercourse. The GeoSeeker can easily make accurate 3D Graphic scans of underground resistivity at a maximum depth of up to 820 feet or 250 meters. Easy to follow step-by-step guided measurements and wireless data transfer to the Tablet PC make using this highly sophisticated Geo-electrical detector one of the deepest and easiest to use!
Features:
Warranty : 2 Year Limited
Total Weight : 4.6 lbs (2.1 kgs)
Input (Charger) : 12 VDC, 1.5 A
Graphics : 3D Graphics of Underground Resistance
Data Sampling Rate : 4096 Hz (64 times oversampling of a 512 samples mean value)
Factory Included Accessories:
Controller
User Manual
Tablet Holder
(4) Electrodes
Android Tablet PC
Charger for Controller
Charger for Power Box
(2) Extension Cables (2 m)
Power Box (Carrying Case)
(8) AA Batteries, Rechargeable
(2) Power Cable Drums (290 mm)
(2) Voltage Cable Drums (120 mm)
USB Power Pack w/ Charger and Travel Adapter
Technical Specifications:
2 Year Warranty
Controller (Receiving Unit)
ADC : 16 Bit
Weight : 1.3 lbs (0.6 kgs)
CPU : 80 MHz Cortex M3
Input (Charger) : 12 VDC, 1.5 A
Power Supply (8 AA batteries) : 8-14 VDC*
Effective Range (differential) : -700 to +700 mV
Operating Time (charged batteries) : Min. 16 Hours
Measurement Period per Scan Point : Min. 16 Seconds
Dimensions (H x W x D) : 5" x 10" x 4" (130 x 270 x 110 mm)
Charging Time (empty batteries) : Typically 3 Hours, Max. 5 Hours
Weight (with mounted cable drums and batteries) : 4.6 lbs (2.1 kgs)
Communication with Power Box : 2.4 GHz Band, On-Demand, Proprietary
Communication with Tablet PC : WLAN-Accesspoint, 2.4 GHz Band, Channel 6, WPA2
Data Sampling Rate : 4096 Hz (64 times oversampling of a 512 samples mean value)
Power Box (Sending Unit)
Weight : 34.8 lbs (15.8 kgs)
Input (Charger) : 24 VDC, 2 A
Charging Time : Max. 8 Hours
Output : Max. 390 V, 0.5 A, 20 W
Operating Time (max. power) : Approx. 8 Hours
Operating Time (min. power) : Approx. 100 Hours
Operating Time (average power) : Approx. 40 Hours
Weight (with mounted electrodes) : 39.6 lbs (18 kgs)
Internal Power Supply : Lead Acid Battery (2 x 12 V, 10Ah)
Dimensions (H x W x D) : 9" x 21" x 14" (230 x 550 x 360 mm)
Communication with Controller : 2.4 GHz Band, On-Demand, Proprietary
Electrodes
Weight : 1.14 lbs (0.52 kgs)
Dimensions (L x W x D) : 17" x 4" x 1" (440 x 120 x 35 mm)
Power Drum (O 290 mm)
Markers : 15
Weight : 14.3 lbs (6.5 kgs)
Cable Length : 836' (255 m)
Dimensions (H x W x D) : 14" x 11" x 7" (360 x 290 x 200 mm)
Voltage Drum (O 100 mm)
Markers : 25
Cable Length : 85' (26 m)
Weight : 1.43 lbs (0.65 kgs)
Dimensions (H x W x D) : 4" x 4" x 1" (120 x 120 x 45 mm)
Tablet PC, Minimum Requirements
Wi-Fi / WLAN : Required
USB Chargeable : Micro-USB-B
Operating System : Android 4.0.3 or Higher
Display : 10" Tablet Screen, Outdoor Brightness
Features:
Mobile Geo-Electrical Detector
Wireless Data Transfer to Tablet PC
3D Graphics of Underground Resistance
Easy Step-by-Step Guided Measurements